HomeMy WebLinkAboutRVCWD CCR 20212021 Consumer Confidence Report
Certification Form
(to be submitted with a copy of the CCR)
Water System Name: Millview, Calpella and Redwood Valley County Water Districts
Water System Number: 2300507.2310006 and 2310008
The water system named above hereby certifies that its Consumer Confidence Report will be distributed
by July V, 2021 to customers (and appropriate notices of availability will be given). Further, the system
certifies that the information contained in the report is correct and consistent with the compliance
monitoring data previously submitted to the Department of Public Health.
Certified by: Name: C. Lane Westbrook
Signature: C . W 4 -
Title: Operator
Phone Number: ( 707 ) 462-2666 Date: 6/22/2022
To summarize report delivery used and good faith efforts taken, please complete the below by checking
all items that apply and fill-in where appropriate:
® CCR was distributed by mail or other direct delivery methods. Specify other direct delivery
methods used:
❑ "Good faith" efforts were used to reach non -bill paying consumers. Those efforts included the
following methods:
❑ Posting the CCR on the Internet at www.
❑ Mailing the CCR to postal patrons within the service area (attach zip codes used)
❑ Advertising the availability of the CCR in news media (attach copy of press release)
❑ Publication of the CCR in a local newspaper of general circulation (attach a copy of the
published notice, including name of newspaper and date published)
❑ Posted the CCR in public places (attach a list of locations)
❑ Delivery of multiple copies of CCR to single -billed addresses serving several persons, such
as apartments, businesses, and schools
❑ Delivery to community organizations (attach a list of organizations)
❑ For systems serving at least 100,000 persons: Posted CCR on a publicly -accessible internet site at
the following address: www.
❑ For -privately -owned utilities: Delivered the CCR to the California Public Utilities Commission
2011 SWS CCR Forms & Instructions Revised Feb 2012
CCR Certification Forin —Attachment 7 Page I o1'1
2021 Consumer Confidence Report
Water System Name: Millview, Calpella & Redwood Valley Report Date: 6/22/2022
County Water District
We test the drinking water quality for marry constituents as required by state and federal regulations. This report shows
the results of our monitoring for the period of January 1 - December 31, 2021 and may include earlier monitoring data.
Este informe contiene informacion muy importante sobre su agua potable. Trad6zcalo 6 hable con alguien que to
entienda bien.
Type of water source(s) in use: Blend of surface water and well water
Name & general location of source(s): Russian River Calpella Well I and Millview Well 6
Drinking Water Source Assessment information: Drinking water assessment report completed June 2011
Time and place of regularly scheduled board meetings for public participation:
Millview CWD: 3rd Tuesday of each month at District Office 151 Laws Ave. Ukiah 5pm
Calpella CWD: 3rd Wednesday of each month at District Office 151 Laws Ave. Ukiah 6pin
Redwood Valley CWD: 3rd Thursday of each month at District Office 151 Laws Ave. Ukiah 5pm
For more information, contact: District Office
Phone: Millview (707) 462-7229
Calpella (707) 462-2666
Redwood Valley (707) 485-0679
I TERMS USED IN THIS REPORT I
Maximum Contaminant Level (MCL): The highest
level of a contaminant that is allowed in drinking
water. Primary MCLs are set as close to the PHGs (or
MCLGs) as is economically and technologically
feasible. Secondary MCLs are set to protect the odor,
taste, and appearance of drinking water.
Maximum Contaminant Level Goal (MCLG): The
level of a contaminant in drinking water below which
there is no known or expected risk to health. MCLGs
are set by the U.S. Environmental Protection Agency
(USEPA).
Public Health Goal (PHG): The level of a
contaminant in drinking water below which there is no
known or expected risk to health. PHGs are set by the
California Environmental Protection Agency.
Maximum Residual Disinfectant Level (MRDL):
The highest level of a disinfectant allowed in drinking
water. There is convincing evidence that addition of a
disinfectant is necessary for control of microbial
contaminants.
Maximum Residual Disinfectant Level Goal
(MRDLG): The level of a drinking water disinfectant
below which there is no known or expected risk to
health. MRDLGs do not reflect the benefits of the use
of disinfectants to control microbial contaminants.
Primary Drinking Water Standards (PDWS): MCLs and
MRDLs for contaminants that affect health along with their
monitoring and reporting requirements.. and water treatment
requirements.
Secondary Drinking Water Standards (SDWS): MCLs for
contaminants that affect taste, odor, or appearance of the
drinking water. Contaminants with SDWSs do not affect the
health at the MCL levels.
Treatment Technique (TT): A required process intended to
reduce the level of a contaminant in drinking water.
Regulatory Action Level (AL): The concentration of a
contaminant which, if exceeded, triggers treatment or other
requirements that a water system must follow.
Variances and Exemptions: State Board permission to
exceed an MCL or not comply with a treatment technique
under certain conditions.
ND: not detectable at testing limit
ppm: parts per million or milligrams per liter (mg/L)
ppb: parts per billion or micrograms per liter (µg/L)
ppt: parts per trillion or nanograms per liter (ng/L)
ppq: parts per quadrillion or picogram per liter (pg/L)
pCi/L: picocuries per liter (a measure of radiation)
2014 SWS CCR Forna Revised Jan 2015
Consumer Confidence Report Page 2 of 6
The sources of drinking water (both tap water- and bottled water) include rivers, lakes, streams, ponds, reservoirs,
springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally -occurring
minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or -
from human activity.
Contaminants that may be present in source water include:
• Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems,
agricultural livestock operations, and wildlife.
• Inorganic contaminants, such as salts and metals, that can be naturally -occurring or result from urban stormwater
runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
• Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff,
and residential uses.
• Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of
industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff,
agricultural application, and septic systems.
• Radioactive contaminants, which can be naturally -occurring or be the result of oil and gas production and mining
activities.
In order to ensure that tap water is safe to drink, the USEPA and the State Water Resources Control Board (State
Board) prescribe regulations that limit the amount of certain contaminants in water provided by public water systems.
State Board regulations also establish limits for contaminants in bottled water that provide the same protection for public
health.
Tables 1, 2, 3, 4, 5, 7, and 8 list all of the drinking water contaminants that were detected during the most recent
sampling for the constituent. The presence of these contaminants in the water does not necessarily indicate that the
water poses a health risk. The State Board allows us to monitor for certain contaminants less than once per year because
the concentrations of these contaminants do not change frequently. Some of the data, though representative of the water
quality, are more than one year old.
TABLE 1 — SAMPLING RESULTS SHOWING THE DETECTION OF COLIFORM BACTERIA
Microbiological
Highest No.
No. of months in
Contaminants
of
violation
MCL
MCLG
Typical Source of Bacteria
(complete if bacteria detected)
Detections
Total Coliform Bacteria
I
i
More than 1 sample in a
0
Naturally present in the
month with a detection
environment
Fecal Coliform or F. coli
0
0
A routine sample and a
0
Human and animal fecal waste
repeat sample detect
total coliform and either
sample also detects fecal
coliform or F. colt
TABLE 2 — SAMPLING
RESULTS SHOWING THE DETECTION OF LEAD
AND COPPER
90th
90'n
Lead and Copper
Sample
No. of
I}e le
No. sites
(complete if lead or copper
Date
samples
level
exceeding
AL
PHG
Typical Source of Contaminant
detected in the last sample set)
collected
AL
detected
Lead (ppb)
Internal corrosion of household
Millview
2021
20
ND
0
15
0.2
water plumbing systems;
Calpella
2021
5
ND
0
15
0.2
discharges from industrial
Redwood Valley
2019
20
0.001
0
15
0.2
manufacturers; erosion of natural
deposits
Copper (ppm)
Internal corrosion of household
Millview
2021
20
0.66
0
1.3
0.17
plumbing systems: erosion of
Calpella
2021
5
0.40
0
1.3
0.17
natural deposits; leaching from
Redwood Valley
2019
20
0.65
0
1.3
0.17
wood preservatives
TABLE 3 — SAMPLING
RESULTS
FOR SODIUM AND HARDNESS
Chemical or Constituent
Sample
Level
Range of
PHG
re
(and orting units)
Date
Detected
Detections
NICL
(MCLG
Typical Source of Contaminant
Sodium (ppm)
2021
10
1 - 19
one
none
Salt present in the water and is
enerall naturally occurring
Sum of 2olualent cations present
2014 SWS CCR Forrn Revised Jan 2015
Consumer Confidence Report Page 3 of '6
Hardness (ppm)
2021
114
121 - 147
none
none
in the water. generally magnesium
and calcium, and are usually
naturally occurrin
*Anv violation ofan 11CL or AL is asterisked Additional information revarcline the violation is provided later in this revort.
TABLE 4 — DETECTION OF CONTAMINANTS WITH A PRIMARY DRINKING WATER STANDARD
Chemical or Constituent
Sample
Level
Range of
MCL
PHG
(and reporting units)
Date
Detected
Detections
1MRDL)
(MCLG)
Typical Source of Contaminant
[MRDLGJ
Erosion of natural deposits; residue
Aluminum (ppm)
2021
.145
<.50 - .290
1
0.6
from some surface water treatment
processes.
Gross Alpha Particle
2021
0.61
0.61
15
0
Erosion of natural deposits
Activity (1 ci/L)
Erosion of natural deposits; water
Fluoride (ppm)
2021
0.05
0 - .1 1
2
1
additive which promotes strong
teeth; discharge from fertilizer and
aluminum factories
Runoff and leaching fi•om fertilizer
Nitrate (as N) (ppm)
2021
0.7
0— 1.4
45
45
use, leaching from septic tanks and
sewage; erosion of natural de osits
Total Trihalomethanes
By-product of drinking water
(TTHM) (ppb)
2021
14.75
6.8 — 22.7
80
N/A
disinfection
Haloacetic Acids
By-product of drinking water
(HAA5) (ppb)
2021
26.01
4.9 — 47.12
60
N/A
disinfection
TABLE 5 — DETECTION OF CONTAMINANTS WITH A SECONDARY DRINKING WATER STANDARD
Chemical or Constituent
Sample
Level
Range of
PHG
(and reporting units)
Date
Detected
Detections
MCL
(MCLG)
Typical Source of Contaminant
Naturally -occurring organic
Color (Units)
2021
15
0 - 30
15
N/A
materials
Leaching from natural deposits;
Iron (ppb)
2021
550
0 - 1100
300
N/A
Industrial wastes
Manganese (ppb)
2021
260
0 — 520
50
N/A
Leaching from natural deposits
Naturally -occurring organic
Odor -threshold (Units)
2021
6
0 - 12
3
N/A
materials
Turbidity (Units)
2021
6
0— 12
5
N/A
Soil runoff
Runoff/leaching from natural
Zinc(ppm)
2021
0
0
5
N/A
deposits; industrial wastes
Total dissolved solids
Runoff/leaching from natural
(TDS) (ppm)
2021
105
0 - 210
1000
N/A
deposits
Specific Conductance
Substances that form ions when in
(uS/em)
2021
260
180 - 340
1600
N/A
water; seawater influence
Runoff/leaching from natural
Chloride (ppm)
2021
6.8
5.5 — 8.1
500
N/A
deposits; seawater influence
Runoff/leachin4 from natural
Sulfate (ppm)
2021
10.9
9.8 - 12
500
N/A
deposits; industrial wastes
TABLE 6 — DETECTION OF UNREGULATED CONTAMINANTS
2014 S1IVS CCR Forrn Revised Jan 2015
Consumer Confidence Report Page 4 of 6
Chemical or Constituent
Sample
Level
Range of
(and reporting units)
Date
Detected
Detections
Notification Level
Health Effects Language
Total Coliform
10/19/21
Present
Level I Assessment and
English and Spanish
Public Notification
*Any violation of an 11CL j1,11ML, or 77is asterisked. Additional information regarding the violation is provided later in this report.
Additional General Information on Drinking Water
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some
contaminants. The presence of contaminants does not necessarily indicate that the water poses a health risk. More
information about contaminants and potential health effects can be obtained by calling the USEPA's Safe Drinking Water
Hotline (1-800-426-4791).
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-
compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ
transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk
from infections. These people should seek advice about drinking water from their health care providers. USEPA/Centers
for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidiurn and other
microbial contaminants are available from the Safe Drinking Water Hotline (1-800-426-4791).
Lead -Specific Language for Community Water Systems: If present, elevated levels of lead can cause serious health
problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and
components associated with service lines and home plumbing. Millview, Calpella and Redwood Valley County Water
Districts are responsible for providing high quality drinking water, but cannot control the variety of materials used in
plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead
exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are
concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water,
testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at
http://www.epa.gov/safewater/lead.
Summary Information for Violation of a MCL, MRDL, AL, TT,
or Monitoring and Reporting Requirement
VIOLATION OF A MCL, MRDL, AL, TT, OR MONITORING AND REPORTING REQUIREMENT
Violation
Explanation
Duration
Actions Taken to Correct
Health Effects
the Violation
Language
"Iron,
Levels well below
ongoing
Filtration
Manganese,
mel after
Turbidity
filtration
"Iron and Manganese exceeded the MCL, these numbers are reflected in raw water prior to filtration and
treatment. State Water Resource Control Board has not required sampling post filtration and treatment.
2014 SWS CCR Form Revised ,Ian 2015
Consumer- Confidence Report Pgge 5 of
For Water Systems Providing Ground Water as a Source of Drinking Water
TABLE 7 — SAMPLING RESULTS SHOWING
FECAL INDICATOR -POSITIVE GROUND WATER SOURCE SAMPLES
Microbiological Contaminants
Total No. of
Sample
MCL
PHG
(complete if fecal -indicator detected)
Detections
Dates
IMRDL)
(MCLG)
Typical Source of Contaminant
IMRDLGI
E. coli
(In the year)
0
(0)
Human and animal fecal waste
Enterococci
(In the year)
1"T
n/a
Human and animal fecal waste
Coliphage
(In the year)
TT
n/a
Human and animal fecal waste
Summary Information for Fecal Indicator -Positive Ground Water Source Samples,
Uncorrected Significant Deficiencies, or Ground Water TT
SPECIAL NOTICE OF FECAL INDICATOR -POSITIVE GROUND WATER SOURCE SAMPLE
Total Coliform violation from 11/29/21 due to lack Offollow LIP procedure ofresarnpling within 24 hours. There was a
citation issued
and the violation was cleared in December of 2021. Resam ling did not show any positive samples.
SPECIAL NOTICE FOR UNCORRECTED SIGNIFICANT DEFICIENCIES
VIOLATION OF GROUND WATER
TT
TT Violation
Explanation
Duration
Actions Taken to Correct
the Violation
Health Effects
Language
For Systems Providing Surface Water as a Source of Drinking Water
TABLE 8 - SAMPLING RESULTS SHOWING TREATMENT OF SURFACE WATER SOURCES
Treatment Technique (0
(Type of approved filtration technology used)
Turbidity of the filtered water must:
Turbidity Performance Standards (1)
1 — Be less than or equal to _3 NTU in 95% of measurements in a month.
(that most be met through the water treatment process)
2 — Not exceed —1.0 NTU for more than eight consecutive hours.
3 — Not exceed 5.0 NTU at any time.
Lowest monthly percentage of samples that met Turbidity
1 100%
2014 SWS CCR Form Revised Jan 2015
Constan7ea• Confidence Report Pake 6 ol'6
Performance Standard No. 1.
Highest single turbidity measurement during the year
.220 ntu
Number of violations of any surface water treatment
requirements
0
(a) A required process intended to reduce the level of a contaminant in drinking water.
(b) Turbidity (measured in NTU) is a measurement of the cloudiness of water and is a good indicator of water quality and filtration performance.
Turbidity results which meet performance standards are considered to be in compliance with filtration requirements.
* .l ny violatioa7 of a TT is anarked ialith an asterisk. Additional inforanation regarding the violation is provided beloir.
Summary Information for Violation of a Surface Water TT
VIOLATION OF A SURFACE WATER TT
TT Violation
Explanation
Duration
Actions Taken to Correct
the Violation
Health Effects
Language
Summary Information for Operating Under a Variance or Exemption
2014 SWS CCR Form Revised Jan 2015