HomeMy WebLinkAboutWCWD CCR 2023Consumer Confidence Report Page 1 of 6
SWS CCR Revised January 2023
2023 Consumer Confidence Report
Willow County Water District
Water System Information
Water System Name: Willow County Water District
Report Date: May 07, 2024
Type of Water Source(s) in Use: Groundwater
Name and General Location of Source(s): Well 03, Well 05, Well 06, Well 07, and well 08: All wells are located
within the service area.
Drinking Water Source Assessment Information: No recent assessment
Time and Place of Regularly Scheduled Board Meetings for Public Participation: Zoom meeting info updated
monthly on the website: www.willowcountywaterdistrict.org.
For More Information, Contact: Jared Walker at 707-462-2666.
About This Report
We test the drinking water quality for many constituents as required by state and federal regulations. This
report shows the results of our monitoring for the period of January 1 to December 31, 2023, and may include
earlier monitoring data.
Importance of This Report Statement in Five Non-English Languages (Spanish, Mandarin,
Tagalog, Vietnamese, and Hmong)
Language in Spanish: Este informe contiene información muy importante sobre su agua para beber. Favor de
comunicarse Willow County Water District a 707-462-2666 para asistirlo en español.
Language in Mandarin: 这份报告含有关于您的饮用水的重要讯息。请用以下地址和电话联系 Willow County Water
District以获得中文的帮助: 707-462-2666.
Language in Tagalog: Ang pag-uulat na ito ay naglalaman ng mahalagang impormasyon tungkol sa inyong inuming tubig.
Mangyaring makipag-ugnayan sa Willow County Water District o tumawag sa 707-462-2666 para matulungan sa
wikang Tagalog.
Language in Vietnamese: Báo cáo này chứa thông tin quan trọng về nước uống của bạn. Xin vui lòng liên hệ Willow
County Water District tại 707-462-2666 để được hỗ trợ giúp bằng tiếng Việt.
Language in Hmong: Tsab ntawv no muaj cov ntsiab lus tseem ceeb txog koj cov dej haus. Thov hu rau Willow County
Water District ntawm 707-462-2666 rau kev pab hauv lus Askiv.
Terms Used in This Report
Term Definition
Level 1 Assessment A Level 1 assessment is a study of the water system to identify potential problems and
determine (if possible) why total coliform bacteria have been found in our water system.
Consumer Confidence Report Page 2 of 6
SWS CCR Revised January 2023
Term Definition
Level 2 Assessment A Level 2 assessment is a very detailed study of the water system to identify potential
problems and determine (if possible) why an E. coli MCL violation has occurred and/or
why total coliform bacteria have been found in our water system on multiple occasions.
Maximum Contaminant
Level (MCL)
The highest level of contaminant that is allowed in drinking water. Primary MCLs are set
as close to the PHGs (or MCLGs) as is economically and technologically feasible.
Secondary MCLs are set to protect the odor, taste, and appearance of drinking water.
Maximum Contaminant
Level Goal (MCLG)
The level of a contaminant in drinking water below which there is no known or expected
risk to health. MCLGs are set by the U.S. Environmental Protection Agency (U.S. EPA).
Maximum Residual
Disinfectant Level (MRDL)
The highest level of disinfectant allowed in drinking water. There is convincing evidence
that addition of a disinfectant is necessary for control of microbial contaminants.
Maximum Residual
Disinfectant Level Goal
(MRDLG)
The level of a drinking water disinfectant below which there is no known or expected risk
to health. MRDLGs do not reflect the benefits of the use of disinfectants to control
microbial contaminants.
Primary Drinking Water
Standards (PDWS)
MCLs and MRDLs for contaminants that affect health along with their monitoring and
reporting requirements, and water treatment requirements.
Public Health Goal
(PHG)
The level of a contaminant in drinking water below which there is no known or expected
risk to health. PHGs are set by the California Environmental Protection Agency.
Regulatory Action Level
(AL)
The concentration of a contaminant which, if exceeded, triggers treatment or other
requirements that a water system must follow.
Secondary Drinking Water
Standards (SDWS)
MCLs for contaminants that affect taste, odor, or appearance of the drinking water.
Contaminants with SDWSs do not affect the health at the MCL levels.
Treatment Technique
(TT)
A required process intended to reduce the level of a contaminant in drinking water.
Variances and Exemptions Permissions from the State Water Resources Control Board (State Board) to exceed an
MCL or not comply with a treatment technique under certain conditions.
ND Not detectable at testing limit.
ppm parts per million or milligrams per liter (mg/L)
ppb parts per billion or micrograms per liter (µg/L)
ppt parts per trillion or nanograms per liter (ng/L)
ppq parts per quadrillion or picogram per liter (pg/L)
pCi/L picocuries per liter (a measure of radiation)
Sources of Drinking Water and Contaminants that May Be Present in Source Water
The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds,
reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves
naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting
from the presence of animals or from human activity.
Contaminants that may be present in source water include:
• Microbial contaminants, such as viruses and bacteria, that may come from sewage treatment plants,
septic systems, agricultural livestock operations, and wildlife.
Consumer Confidence Report Page 3 of 6
SWS CCR Revised January 2023
• Inorganic contaminants, such as salts and metals, can be naturally occurring or result from urban
stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or
farming.
• Pesticides and herbicides, that may come from a variety of sources such as agriculture, urban
stormwater runoff, and residential uses.
• Organic chemical contaminants, including synthetic and volatile organic chemicals, that are byproducts
of industrial processes and petroleum production, and can also come from gas stations, urban
stormwater runoff, agricultural application, and septic systems.
• Radioactive contaminants, that can be naturally occurring or be the result of oil and gas production and
mining activities.
Regulation of Drinking Water and Bottled Water Quality
In order to ensure that tap water is safe to drink, the U.S. EPA and the State Board prescribe regulations that
limit the number of certain contaminants in water provided by public water systems. The U.S. Food and Drug
Administration regulations and California law also establish limits for contaminants in bottled water that provide
the same protection for public health.
About Your Drinking Water Quality
Drinking Water Contaminants Detected
Tables 1, 2, 3, 4, 5, 6, and 8 list all of the drinking water contaminants that were detected during the most
recent sampling for the constituent. The presence of these contaminants in the water does not necessarily
indicate that the water poses a health risk. The State Board allows us to monitor for certain contaminants less
than once per year because the concentrations of these contaminants do not change frequently. Some of the
data, though representative of the water quality, are more than one year old. Any violation of an AL, MCL,
MRDL, or TT is asterisked. Additional information regarding the violation is provided later in this report.
Table 1. Sampling Results Showing the Detection of Coliform Bacteria
Complete if bacteria are detected.
Microbiological
Contaminants
Highest No. of
Detections
No. of
Months in
Violation
MCL MCLG Typical Source of
Bacteria
Total Coliform 0 0 (a) 0 Naturally present in
the environment
Fecal Coliform or E.
coli
0 0 (a) 0 Human and animal
fecal waste
(a) Routine and repeat samples are total coliform-positive and either is E. coli-positive, or system fails to take repeat
samples following E. coli-positive routine sample or system fails to analyze total coliform-positive repeat sample for E. coli.
Table 2. Sampling Results Showing the Detection of Lead and Copper
Complete if lead or copper is detected in the last sample set.
Consumer Confidence Report Page 4 of 6
SWS CCR Revised January 2023
Lead and
Copper Sample Date
No. of
Samples
Collecte
d
90th
Percentil
e Level
Detected
No.
Sites
Exceedi
ng AL
AL PHG Typical Source of
Contaminant
Lead
(ppb)
2023 20 0 1 15 0.2 Internal corrosion of household water
plumbing systems; discharges from
industrial manufacturers; erosion of
natural deposits
Copper
(ppm)
2023 20 1.5 3 1.3 0.3 Internal corrosion of household
plumbing systems; erosion of natural
deposits; leaching from wood
preservatives
Table 3. Sampling Results for Sodium and Hardness
Chemical or
Constituent (and
reporting units)
Sample Date Level
Detected
Range of
Detections MCL PHG
(MCLG)
Typical Source of
Contaminant
Sodium (ppm) 2022 13 13 None None Salt present in the water
and is generally naturally
occurring
Hardness (ppm)
2022 114 114 None None Sum of polyvalent cations
present in the water,
generally magnesium and
calcium, and are usually
naturally occurring
Table 4. Detection of Contaminants with a Primary Drinking Water Standard
Chemical or
Constituent
(and
reporting units)
Sample Date Level
Detected
Range of
Detections
MCL
[MRDL]
PHG
(MCLG)
[MRDLG]
Typical Source of
Contaminant
Flouride (ppm)
2022 ND ND 2 2 Erosion of natural
deposits
Gross Alpha Particle
(pCi/L)
2021 1.50 1.09 – 1.91 15 0 Erosion of natural
deposits
Nitrate (ppm) 2023 1.03 .97 – 1.1
10 10 Runoff, leaching
from septic tanks,
erosion of natural
deposits
Total Trihalomethanes
(ppb) 2023 3.41 3.41 80 N/A
By-product of
drinking water
chlorination
Haloacetic Acids (ppb) 2023 5.1 5.1 60 N/A By-product of
drinking water
chlorination
Chlorine 2023 1.00 .60 – 1.49 4 4 Drinking water
disinfectant added
for treatment
Consumer Confidence Report Page 5 of 6
SWS CCR Revised January 2023
Table 5. Detection of Contaminants with a Secondary Drinking Water Standard
Chemical or
Constituent (and
reporting units)
Sample Date Level
Detected
Range of
Detections MCL
Typical Source
of
Contaminant
Turbidity (NTU) 2022 .445 .445 5 N/A
Sulfate (ppm) 2022 13.05 9.1 – 17 500 Runoff/ leaching natural deposit;
industrial waste
Chloride (ppm) 2022 7.65 7.6 - 7.7 500 Runoff/ leaching natural deposit;
industrial waste
Specific
Conductance(us/cm)
2022 240 240 1600 Substances that form ions in water;
seawater influence
Total Dissolved Solids
(ppm)
2022 150 150 1000 Runoff/ leaching natural deposit;
industrial waste
Table 6. Detection of Unregulated Contaminants
Chemical or
Constituent (and
reporting units)
Sample Date Level
Detected
Range of
Detections
Notification
Level Health Effects
N/A
Additional General Information on Drinking Water
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some
contaminants. The presence of contaminants does not necessarily indicate that the water poses a health risk.
More information about contaminants and potential health effects can be obtained by calling the U.S. EPA’s
Safe Drinking Water Hotline (1-800-426-4791).
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-
compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone
organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be
particularly at risk from infections. These people should seek advice about drinking water from their health
care providers. U.S. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the
risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking
Water Hotline (1-800-426-4791).
Lead-Specific Language: If present, elevated levels of lead can cause serious health problems, especially for
pregnant women and young children. Lead in drinking water is primarily from materials and components
associated with service lines and home plumbing. [Enter Water System’s Name] is responsible for providing
high quality drinking water but cannot control the variety of materials used in plumbing components. When
your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your
tap for 30 seconds to 2 minutes before using water for drinking or cooking. [Optional: If you do so, you may
wish to collect the flushed water and reuse it for another beneficial purpose, such as watering plants.] If you
are concerned about lead in your water, you may wish to have your water tested. Information on lead in
drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe
Drinking Water Hotline (1-800-426-4791) or at http://www.epa.gov/lead.
Additional Special Language for Nitrate, Arsenic, Lead, Radon, and Cryptosporidium: [Enter Additional
Information Described in Instructions for SWS CCR Document]
State Revised Total Coliform Rule (RTCR): N/A
Consumer Confidence Report Page 6 of 6
SWS CCR Revised January 2023
Summary Information for Violation of a MCL, MRDL, AL, TT, or Monitoring and Reporting Requirement
Table 7. Violation of a MCL, MRDL, AL, TT or Monitoring Reporting Requirement
N/A
For Water Systems Providing Groundwater as a Source of Drinking Water
Table 8. Sampling Results Showing Fecal Indicator-Positive Groundwater Source Samples
Microbiological
Contaminants (complete
if fecal-indicator
detected)
Total No. of
Detections Sample Dates MCL
[MRDL]
PHG (MCLG)
[MRDLG]
Typical Source of
Contaminant
E. coli 0 1/1 - 12/31/23 0 (0) Human and animal fecal
waste
Enterococci 0 1/1 - 12/31/23 TT N/A Human and animal fecal
waste
Coliphage 0 1/1 - 12/31/23 TT N/A Human and animal fecal
waste
Summary Information for Fecal Indicator-Positive Groundwater Source Samples, Uncorrected Significant
Deficiencies, or Violation of a Groundwater TT
Special Notice of Fecal Indicator-Positive Groundwater Source Sample: None Detected
Special Notice for Uncorrected Significant Deficiencies: None Detected
Table 9. Violation of Groundwater TT
Violation Explanation Duration Actions Taken to
Correct Violation
Health Effects
Language
N/A